DBIA Virtual Certification Workshop - December 13 - 15, 2021

  • Registration Closed

A three-day intensive program including the three DBIA core courses required for certification plus access to the conde of conduct and exam prep webinars. We advise attendees to take the code of conduct webinar before the workshop.

Code of Conduct Webinar (Pre-Workshop)
Day 1: Principles of Design-Build Delivery & Procurement
Day 2: Post Award: Executing the Delivery of Design-Build Projects
Day 3: Contracts & Risk Management

Exam Prep Webinar (Post-Workshop)

FormatVirtual

The DBIA Virtual Training classroom is not an “online” experience, but instead a true “virtual” experience. It allows remote attendees a real-time participant experience, fully engaged with their instructor and others in the classroom.In the case of DBIA Certification Workshops in particular, this full engagement is critical. Full attendance at the workshop is a requirement for those seeking certification. As such, the following is required for those joining the classroom virtually:

  • You MUST have video/camera capability on the computer you will be using;
  • You MUST keep your video/camera on during the entirety of the training (you may turn it off during breaks and lunch). Each participant is expected to be visible as a class participant throughout the training, just as it would be if you were physically in the classroom;
  • Please find a quiet location that will have minimal distractions/disturbances;
  • Please Mute your microphone when you are not speaking; and
  • Remain in the virtual classroom during class activities as they, too, will take place virtually and you are expected to participate.

DBIA instructors and staff will actively monitor your attendance and reserve to right to decline issuance of a certificate of completion should virtual attendees not actively participate based on the rules above.

If you have any questions, don’t hesitate to contact Education@dbia.org.

Robert P Rizzieri

MS, PE, PMP, CCM, DBIA, Fellow ASCE

Rizzieri Consulting LLC

He is an accomplished Senior Executive, versatile and strategy-driven with comprehensive leadership experience in the Engineering & Construction industry. He has been recognized by Associated General Contractors of America and American Society of Civil Engineers for his industry level contributions. He obtained success on highly complex, and high profile National and International multibillion-dollar projects/programs; successfully led large, dispersed teams comprised of Architect/Engineering Firms, Contractors, State and Federal Agencies, NGOs, and Foreign Governments in a cost-effective manner and outcome.Currently, Principle of Rizzieri Consulting LLC. His wide spectrum of expertise allows him to provide Infrastructure Advisory Services for Federal & State Agencies, Owners, Contractors & Architect/Engineering Firms. Advisory services cover Design-Build and DBIA training, Infrastructure (including Water) & Facilities Acquisition Strategies; Project Delivery Strategies, P3 & Mega Programs planning & oversight framework; Partnering & Dispute Resolution Strategies; Sustainability and Climate Resilience of Infrastructure and Facilities to mitigate effects of Climate Change, and Renewable Energy. He is the Vice Chair of DBIA’s Federal Markets Committee.He retired from HQ US Army Corps of Engineers, as the Deputy Chief Engineering & Construction Division, who shared responsibility with the Chief of E&C for planning, programing, policy, and execution of USACE's worldwide E&C missions (over 17,000 professionals). E&C activities cover Civil Works & Military Programs for Army, Air Force, DOD agencies, Federal Agencies and Foreign Governments that exceeded $25B. He was the Executive Chair of USD(AT&L)'s Facility Engineering’s Functional Integrated Product Team for all of DOD. He has both responded to and gone before numerous Congressional Committee’s Professional Staff on inquires, as well as performed Congressional “drafting services” to assist them in creating new laws. Two of the “services” became new laws. He led the establishment of the technical acceptance policy and system to accept over $6B VA Medical Capital Program for USACE and the VA. He led the revision and re-issuance of USACE’s Partnering policy and worked with Associated General Contractors of America to help implement. While in USACE he held DAWIA Level III Certification in Contracting and Facilities Engineering Career Fields and Level II in Program Management. He was an Administrative Contracting Officer for 15 years on Firm Fixed Price, Cost Reimbursement and Time & Material construction & remediation contracts.He has received numerous awards, including the Army's Meritorious Civilian Service award from 2 Lieutenant Generals, Chief of Engineers.Education: Clarkson University, BS in Civil & Environmental Engineering; Florida Institute of Technology, MS in Management.

Raquel Ibarra, PE, DBIA

PE, DBIA

IBARRA Consulting Engineers, Inc.

Raquel Ibarra, PE, DBIA is the president of IBARRA Consulting Engineers, Inc. For the past 24 years, she has provided and facilitated the mission, vision and strategic goals for IBARRA. Raquel has over 30 years experience in Horizontal infrastructure. Raquel has made IBARRA one of the leading Highway, Heavy Civil, Mass Transit, Rail, Aviation, Transportation, Highways, Municipal, and Public Works companies, specializing in Concession, Design-Build, P3, CDA, CMAR, and Program Management projects. Her company specializes in major Horizontal Infrastructure, in both public and private sectors, ranging from $1 million to $2.5+ billion. Ms. Ibarra was instrumental in securing IBARRA's $25 million TxDOT contract for the state's transportation procurements services for Alternative Delivery contracts (Concessions, DBMO, Design Built and P3) for state projects over $250 million. 

She has a strong civic sense and makes it her mission to stay involved in the community. She has a leadership role on a variety of Boards of Commissions related to public, private, transportation and entrepreneurship. Some of the Board of Directors she is a member of include DBIA SW Region and Transit Coalition of North Texas (TCNT). As part of her Board duties in TCNT she attends the state capital legislative sessions and hold reception for the congress and senators to promote DBIA public projects in Texas. She would like to continue to provide her expertise to DBIA in Horizontal Infrastructure and the major advancements that continue to develop in Horizontal spectrum of DBIA. Her knowledge of Horizontal infrastructure extends the gamete of planes, trains, automobiles and water/wastewater facilities. Ms. Ibarra holds a Bachelor's degree of Science in Architectural Engineering, specialized in Structural Engineering and Construction Management from the University of Texas as Austin. She is licensed as a Professional Engineer, certified DBIA professional and DBIA instructor by the Design-Build Institute of America. 

James (Jim) Ropelewski, JD, DBIA

JD, DBIA

DBIA

Jim is a former member of the Senior Executive Service with over 30 years of broad experience leading Federal organizations in the areas of law, procurement, budget, and design and construction programs. He served as a Deputy General Counsel, Senior Procurement Executive, Deputy Chief Financial Officer, and an Assistant Inspector General.  He is an advisor to the Design-Build Institute of America (DBIA) in matters involving curriculum and resource development, as well as serving as an instructor for several of their training courses.  He served on DBIA’s Universal Best Practices Subcommittee and led the Federal Sector Best Practices Working Group.  He is currently a member of DBIA’s Core Curriculum and Exam Update Committee. As Principal for ROPE Strategies, LLC, Jim provides advisory services in design-build integrated project delivery and serves as a facilitator for structured partnering workshops. 

Key:

Complete
Failed
Available
Locked
Pre-Workshop Webinar
DBIA Code of Professional Conduct Webinar
Open to view video.
Open to view video.
Certificate of Completion - DBIA Code of Professional Conduct Webinar
1.00 CEU credit  |  Certificate available
1.00 CEU credit  |  Certificate available
Day 1 - Principles of Design-Build Project Delivery & Procurement
Principles of Design-Build Project Delivery & Procurement
12/13/2021 at 10:00 AM (EST)  |  480 minutes
12/13/2021 at 10:00 AM (EST)  |  480 minutes ***PLEASE LAUNCH CLASS DIRECTLY FROM THE DBIA LEARNING PORTAL.*** If you are having trouble launching the class via the learning portal, you can use the meeting information below. However, you will not be marked as attended. You will also need to contact DBIA at Education@dbia.org. Meeting ID: 899 3692 6561 Passcode: 570409 Find your local number: https://us02web.zoom.us/u/kblkOg2Znz
Survey - Principles of Design-Build Project Delivery & Procurement
10 Questions
Certificate of Completion - Principles of Design-Build Project Delivery & Procurement
8.00 CEUs credits  |  Certificate available
8.00 CEUs credits  |  Certificate available
Day 2 - Post Award: Managing the Design-Build Process
Post Award: Managing the Design-Build Process
12/14/2021 at 10:00 AM (EST)  |  480 minutes
12/14/2021 at 10:00 AM (EST)  |  480 minutes ***PLEASE LAUNCH CLASS DIRECTLY FROM THE DBIA LEARNING PORTAL.*** If you are having trouble launching the class via the learning portal, you can use the meeting information below. However, you will not be marked as attended. You will also need to contact DBIA at Education@dbia.org. Meeting ID: 899 3692 6561 Passcode: 570409 Find your local number: https://us02web.zoom.us/u/kblkOg2Znz
Survey - Post Award: Managing the Design-Build Process
10 Questions
Certificate of Completion - Post Award: Managing the Design-Build Process
8.00 CEUs credits  |  Certificate available
8.00 CEUs credits  |  Certificate available
Day 3 - Design-Build Contracts & Risk Management
Design-Build Contracts & Risk Management
12/15/2021 at 10:00 AM (EST)  |  480 minutes
12/15/2021 at 10:00 AM (EST)  |  480 minutes ***PLEASE LAUNCH CLASS DIRECTLY FROM THE DBIA LEARNING PORTAL.*** If you are having trouble launching the class via the learning portal, you can use the meeting information below. However, you will not be marked as attended. You will also need to contact DBIA at Education@dbia.org. Meeting ID: 899 3692 6561 Passcode: 570409 Find your local number: https://us02web.zoom.us/u/kblkOg2Znz
Survey - Design-Build Contracts & Risk Management
10 Questions
Certificate of Completion - Design-Build Contracts & Risk Management
8.00 CEUs credits  |  Certificate available
8.00 CEUs credits  |  Certificate available
Post-Workshop Webinar
Design-Build Certification Exam Prep Webinar
Open to view video.
Open to view video.
Certificate of Completion - DBIA Certification Exam Prep Webinar
4.00 CEUs credits  |  Certificate available
4.00 CEUs credits  |  Certificate available

What is the Credential?

The Designated Design-Build Professional© certification program is the premier credential for design-build professionals.

Through a combination of education, experience and testing, the DBIA certification program sets a recognized standard for design-build knowledge and expertise.

DBIA offers 2 types of certification

• DBIA©
The DBIA© certification requires from two to six years of hands-on experience of pre and post-award design-build.


• Assoc. DBIA©
The Assoc. DBIA© certification does not require hands-on field experience, however it requires a different type of experience:
Pre-award professionals (business development and acquisition/procurement)
Seasoned professionals new to design-build project delivery; and
Emerging professionals (AEC industry college graduates)

What are the Requirements?

Associate DBIA©
• Approved application
• Bachelor’s Degree in an approved field of study. 
Degree not in an approved field of study? No degree? Candidates may qualify through additional experience.
• Three to six years of experience in design and construction industry. 
• Completion of DBIA core courses
• Pass certification examination.

DBIA©
• Approved application
• Bachelor’s Degree in an approved field of study. 
Degree not in an approved field of study? No degree? Candidates may qualify through additional experience.
Three to six years of experience in integrated project delivery (67% must be design-build experience). 
• Completion of DBIA core courses and Code of Conduct Webinar
• 18 hours of approved elective credit
• Three references (one must be an owner)
• Pass certification examination.